FAUX BLEACH Sublimation T-Shirts 95% Polyester Adult Sizes

  • $10.80
    Unit price per 
Shipping calculated at checkout.


Please read 

Cover both sides of press for these 

SIZE CHART: ALL IN INCHES
Length=L
Width (measured at chest)=W

KIDS/YOUTH SIZES:
SIZE 2- 12.6IN L X 10.5IN W
SIZE 3- 14.5IN L X 11.5IN W
SIZE 4- 16.5IN L X 12.5IN W
SIZE 6- 18.5IN L X 13.5IN W
SIZE 8- 20.5IN L X 14.5 IN W
SIZE 10- 22.5IN L X 15.5 IN W
SIZE 12- 24.5IN L X 16.5IN W
SIZE 14- 27IN L X 17.5 IN W

ADULT SIZES:
XS=L-27.56in W-15.56in
S=L-28in W-17in
M=L-28.5 W-19in
L=L-29in W-21in
XL=L-30in W-23in
2XL=L-31in W-25in
3XL=L-32.5in W27in                         4XL=L-33.5in W29in

Bleach Spot size adult in cm
S-30x30
M-31Hx30W
L-32x32
XL-33Hx34W
2XL- 34Hx36W
3XL- 35Hx38W

Bleach Spot Size Kids in CM
2- 18Hx20W
3- 18Hx20W
4- 20Hx22W
6- 20Hx23W
8- 20.5Hx24W
10- 21Hx26W


***Read instructions before pressing***

These Faux Bleached shirts are 95% polyester and 5% spandex. They start white and the color is pressed on with sublimation ink leaving the bleach spot for customization fabric and the color is dyed with sublimation ink to give the bleach look. The feel is in between polyester and cotton feel with a shine. They have a bit of stretch.

****These do stretch a bit so if like a little baggier of a shirt, you may want to size up****

💥PRESSING INSTRUCTIONS💥

Make sure you use PLENTY of butcher paper!! Also, NEVER use brown heat tape on fabric items like this because it will leave brown stains.
Cover the entire bottom of your press with butcher paper leaving nothing exposed to the shirt, do the same exact thing with the top of the press. Also one piece of butcher paper inside the shirt preferably folded in half to give extra protection from the color on the back transferring.

I find it easy to use masking tape to tape the butcher paper to the outside metal part of the press

ALSO- Please put a pressing pillow inside the middle of the shirt. The pressing pillow should be completely covered with butcher paper on both sides to prevent the ink from getting on the pressing pillow. If any of your ink is exposed to the pressing pillow it will stain the next item you press. Also it is a good idea to use an extra piece of larger butcher paper on inside the shirt to press in addition to the pressing pillow.


You can also press for 45 seconds at 375-with light pressure. The preprinted background designs already on each shirt is also heat activated. Therefore the color will transfer to the element or pad if not covered. Put the least amount of color under the press.

⭐️⭐️PSA⭐️⭐️
There may be a learning curve to get the time, temperature, pressure, and overall method done correctly as with all sublimation items. Please understand everything stated is what works for me and you may need to tweak it a bit. Ex. Heat press runs hotter or cooler, light pressure may vary from person to person.

Please reach out with any questions before you attempt to sub your image and I’ll help to the best of my ability.

PLEASE NOTE THAT YOU MUST COVER YOUR ENTIRE PRESS FOR THESE SHIRTS OR YOU END UP WITH LEFTOVER INK ON YOUR PRESS THAT WILL TRANSFER ONTO YOUR NEXT ITEM YOU PRESS.

VERY IMPORTANT TO COVER THE ENTIRE HEAT PRESS WITH BUTCHER PAPER AS WELL AS A SHEET INSIDE THE MIDDLE OF THE SHIRT

Customer Reviews

Based on 3 reviews Write a review